Your Water Heater - A Little Prevention
The risks associated with hot tap water are twofold:
burns and bacterial contamination.
To reduce the risk of burns from hot tap water, the temperature setting on the water heater can be turned down. But if the temperature is set too low, bacteria may begin to grow in the tank. Even at 60° C – the setting on most electric water heaters – an estimated 25% of all water heaters are contaminated by legionella bacteria.
Legionella bacteria tend to grow in the lower temperatures at the bottom of water heater; such bacteria can cause a form of pneumonia. The organism is generally transmitted when people inhale contaminated water droplets from whirlpool baths, showers or building air conditioning systems. In Québec, about 100 people a year are hospitalized for pneumonia caused by contaminated residential water heaters.
In light of the statistics, it is not advisable to lower the water heater temperature to, say, 49° C. This would not only reduce the hot water supply by some 20%, it would also put your household at risk of contracting pneumonia. So what's the solution?
Hydro-Québec recommends controlling the maximum hot water temperature by installing appropriate mixing control valves either at the outlet of your water heater, or at your faucets. Installing them at the faucets has the advantage of keeping the water temperature in the hot water pipes at 60° C, which helps reduce bacterial growth.
If you are concerned about legionella contamination in your hot water system, consider buying a high-temperature, stainless steel electric water heater which prevents bacterial growth.
Here is some more useful advice to help keep your hot water supply safe:
This message was prepared by the Hydro-Québec Direction – Santé et sécurité in conjunction with the Ministère de la Santé et des Services sociaux du Québec.
Article Source: www.hydroquebec.com