New Regulation on Water Temperature to Affect Home Plumbing
New Regulation on Water Temperature to Affect Home Plumbing
November 16, 2004
Residents who are installing a new hot water tank or making extensive changes to their plumbing will soon feel the effect of an amendment to the Ontario Building Code. The amendment is meant to protect people, especially children, from scalding water.
This past September, the Ontario Building Code was changed to specify that the maximum hot water temperature supplied to fixtures in residences must not exceed 49 degrees Celsius. The City of Windsor’s position is that after December 1, 2004, anyone making changes to a water system must comply.
“Under the Ontario Building Code,” explained Chief Building Official Mario Sonego, “any material alteration to a building must comply with the temperature limit of 49 o Celsius. A building permit will be required for the replacement of a hot water tank, new construction or renovations, as is the normal process. Other alterations to an existing plumbing system or the replacement of any hot water faucet will not require a permit but still must comply with the new temperature limit.”
The options available are:
- Installation of pressure-balanced or thermostatic-mixing shower valves for shower heads and an anti-scald device at each hot water faucet
- Installation of an anti-scald mixing valve at the outlet of the water heater to lower the temperature to 49 degrees C
- Installation of a water heater with an integral anti-scald device
Permits are issued in the Building and Development Department, City Hall, 350 City hall Square West, 4th Floor. The cost of the permit is $75.00. Additional information can be obtained by calling the department at (519) 255-6861, or the Ontario Ministry of Municipal Affairs and Housing Building and Development Branch at (416)-585-6666, or by viewing its web site at www.mah.gov.on.ca
Brian Worrall
Communication Services
City of Windsor
Tel: (519) 255-6384
Cell: (519) 818-0268
E-mail: bworrall@city.windsor.on.ca